Space RHA short course · Chapter 7 of 12 · about 53 minutes
Test execution and observation
How to run the test so that the record can be reconstructed afterward: the frozen plan, the measurement chain, dosimetry, live time, cumulative dose sequences, event capture and destructive modes.
Lessons
- 01Freeze the plan and prove the observation chain14 minDecide what the test should reveal, which signals will show it and when a run should stop, and write the functional and parametric limits down before anyone has seen the …
- 02Dosimetry and live time12 minThe machine setting and the fluence at the active region are different quantities. Confirm the beam position, field size and coverage at the device itself, and keep the m…
- 03Running cumulative and event tests14 minCumulative damage shows up as a parameter or a function that changes with dose, and a final pass or fail is the least informative view of it. Measure each part before irr…
- 04Destructive modes and the run record13 minDestructive SEE testing spends devices to find where an application becomes unsafe. Set the test up to capture the onset rather than to find a dead part afterward, apply …