Space RHA short course · Chapter 2 of 12 · about 60 minutes
Shielding and transport
How the environment outside the spacecraft becomes the environment at the part. Where the transport problem starts and ends, what geometry and materials do to each particle, how to choose and review a method, and what to hand to the people who write the requirements.
Status: this chapter is the earlier material rewritten into the lesson flow. The worked examples with computed numbers that chapters 1 and 6 to 12 have are still to be written here; where a lesson has an exercise instead, that is why.
Lessons
- 01Radiation at the part10 minThe radiation outside a spacecraft passes through structure, neighboring equipment and the package before it reaches a part. Along the way, particles slow down, change di…
- 02Shielding has directions10 minA part near an opening sees much less material in one direction than in another. Moving the part, or adding a real cover, changes those paths. A single wall thickness can…
- 03What a shield does to each particle10 minA shield can stop or slow particles, but it also scatters them and creates secondary radiation. Removing the lower-energy particles often brings the accumulated dose down…
- 04Choosing a transport method10 minA simple dose-depth calculation is often enough for an early shielding trade. A path model adds placement and coverage. Detailed transport follows the interactions and th…
- 05Reviewing a transport result10 minA missing cover, a filled cavity or a wrong material can change the answer before any of the physics comes into play. Inspect the model and its mass first. Then check whe…
- 06The transport handoff10 minTransport connects the environment outside the spacecraft to the hardware inside it. Its outputs feed dose requirements, displacement-damage assessments and single-event …